PFAS In Water

PFAS in drinking water is fast becoming a big topic on the national political stage, because there is a concern about PFAS causing adverse health effects. They are commonly known as forever chemicals. And this is because they never go away. Also, PFAS are known as Polyfluoroalkyl or Perfluoroalkyl Substances. The folks over at EWG say that they're testing shows that virtually all Americans now have some level of PFAS in their blood. READ MORE from EWG.org HERE.

Budget Priced PFAS removing water filters from $65. We have every type of PFAS filter you might need. You can filter at the kitchen sink. Or filter PFAS from the whole house. We have filters for public water supplies or private wells. You will see these filters listed farther down this page.

What are PFAS?

PFAS are a group of man-made chemicals that have been in use since the 1940s. Two of the most studied PFAS are perfluorooctanoic acid (PFOA) and perfluorooctane sulfonate (PFOS). Commonly referred to as Perfluoroalky and polyfluoroalkyl substances. PFAS are (or have been) found in a wide array of consumer products like cookware, food packaging, and stain and water repellants used in fabrics, carpets and outerwear.

Often times PFAS manufacturing and processing facilities, and airports and military installations that use firefighting foams which contain PFAS, are some of the contributors of PFAS chemical releases into the air, soil, and water. And this includes common sources of drinking water.

Because of their widespread use and environmental persistence, most people have been exposed to PFAS chemicals. There is evidence that exposure to certain PFAS may lead to adverse health effects. The source for this information was the EPA website.

How do I remove PFAS from my drinking water?

Removing PFAS from your drinking water is normally pretty easy and inexpensive to do.

FIRST

The first thing to do. Is to determine whether you want to remove the PFAS from the whole house (POE). Or just the drinking water only (POU).

SECOND

The second thing is to determine how much PFAS is actually in the water? And to test the basic water quality if possible before deciding on a proper PFAS filter system. If you get your water from a public water supply. They may have some test results on their water quality report. And most water quality reports can be found on your public water provider's website. Or you can give us a call and we can try and find it for you. PFAS water testing can be quite expensive. So some people just treat for worst case scenario. We have power PFAS filters that can remove massive amounts of PFAS contaminants.

THIRD

The third thing to do is to determine what the source of the PFAS is? For example, are you on a public water supply? Or are you on a private well that you want to remove PFAS from? The reason that this is so important is because most public water supplies have been treated to some degree for basic common issues such as iron, sulfur etc. And so they are unlikely to have as many contaminants that will interfere with the filter. But public water supplies may be very high in chlorine, chloramines, calcium hardness and other substances. So they may interfere with the filter's effectiveness.

Private well water is far more likely to have contaminants such as iron, sulfur, sediment etc. that will possibly interfere with the filter's ability to function, or to last a long time. Before filtering or treating well water for PFAS. There are some basic things you should do to be certain your filters will work well. It just takes a few moments around the house to gather this information to be sure that you are removing Polyfluoroalkyl and Perfluoroalkyl properly.

In order for us to help you properly on a private well. We would need you to gather the information requested under items 7, 16 and 17 on this page:

Well Water Filter Instructions

It should only take a few minutes around the house to get us what we need. Once you have that information, please contact us again and we can tell you EXACTLY what you need, and EXACTLY what it will cost. And you can be SURE it will work. Most people are pleasantly surprised how low priced our solutions are. Any company that doesn’t insist on this information, is not doing it correctly, or they are likely selling marginal products. You simply must have this information to do it correctly, and have it work correctly, right from the start.

Please don’t hesitate to give us a quick call to discuss your issues. Keep in mind our technicians are not allowed to ask you to buy anything or pressure you in ANY way. They just answer your questions and give you great advice. We are the online leader for water treatment worldwide. We set the standard for all others to follow.

Questions? Call 800-684-0979 for assistance.

E-mail: support@waterfiltersofamerica.com

PFAS WATER FILTER CARTRIDGE

This filter cartridge is an industry standard sized 10 inch filter. And it is filled with a selective mineral that is designed to remove virtually all of the PFAS contaminant in your drinking water. As long as it is properly applied. It fits most industry standard 10" x 2.75" filter canisters. You can use it in a cannister as a stand alone cartridge for just the drinking water. Or you can insert it into a standard sized canister on a reverse osmosis unit that accepts this industry standard sized cartridge. If you need the complete filter and canister set up, just look at the next item on this page. Because it has everything you need included in the complete package.

Industry Standard 2.75"x 10" PFAS filter cartridge.

NEW! $65 Free Shipping! Buy Now

PFAS WATER FILTER COMPLETE

This industry standard sized 10 inch filter is most commonly used for the drinking water only (POU). Such as the kitchen sink or refrigerator. If you want to remove PFAS from the entire house (POE), then you would want to look at one of the bigger filters that are listed below on this page. This filter can normally be used on both private well water and public water supplies. If you're not sure if it has the right filter for you, just give us a quick call. And a friendly water tech can be sure you get exactly the correct filter.

10" Standard 2.75" x 10"

Package includes complete system with canister, filter cartridge, mounting bracket and filter wrench for easy filter cartridge replacement.

NEW! $99 Free Shipping! Buy Now

**PFAS HIGH FLOW WATER FILTER COMPLETE**

This huge canister can be place on the incoming household water line. Or just on the drinking water line only. It is filled with a PFAS selective mineral that is specifically designed to remove virtually all of the PFAS in your drinking water when properly applied. Everything you would normally need comes in this package. But if you are not sure exactly what you need, just give us a quick call. This filter can normally be used on private wells or on public water supplies.

Complete system comes with canister, filter cartridge, mounting bracket and filter wrench for easy filter replacement.

Features a 20" Hi flow 4.5" x 20" filter canister.

NEW! $249 Free Shipping! Buy Now

PFAS RO FILTER SYSTEM

This is the ultimate PFAS drinking water filter system. Because not only does it take out PFAS contaminants, but it also takes out many other foreign substances such as lead, dissolved solids, heavy metals, nitrates and hundreds of other unwanted contaminants from your drinking water. And it makes the water taste so good! And it is powerful enough to do the kitchen sink, as well as the refrigerator and ice-maker. It features a PFAS specific removal cartridge as one of the five stages of purification. And unlike most reverse osmosis filter systems, this one is designed to take out all of the PFAS. And you cannot find a better drinking water system at any price.

Complete RO PFAS system with filter cartridge.

NEW! $285 Buy Now

OUR MOST POPULAR PFAS REMOVAL SYSTEM

Whole house PFAS removal system features a 2 Cubic Foot PFAS polishing filter tank for whole house PFAS reduction. Also it includes a 5 stage reverse osmosis drinking water filter purification system for the kitchen. And this system is excellent for Polyfluoroalkyl and Perfluoroalkyl removal. This is great for families on a budget who want to reduce contaminants in the whole house. But who are primarily interested in pure drinking water for their family. Also removes foul taste and odors from the whole house, including showers. And it removes chlorine and other strong chemicals from the house.

Total price is only $1999 Buy Now

PFAS WHOLE HOUSE WATER FILTER

This filter is the absolute ultimate whole house PFAS contaminant removal. The PFAS specific removal minerals inside the tank is designed to remove virtually all of the PFAS from every sink and faucet in the entire household. It is great for cleaning the water from public water supplies and private well water systems. The system is designed to handle maximum flow rates up to 25 gallons per minute. We also have a number of different sizes, including for a lower flow rates. So if you're not sure what you need. Just give what about friendly water techs a call. This backwashing and self-cleaning automatic water filter tank is designed to remove high amounts of PFAS contaminants. It is the most effective PFAS removal system that we carry. And each unit is custom made to order right here in the good old USA.

Longer life and higher flow rates
NSF certified, one piece, seamless poly filter tank for long life
2 cubic feet of specific PFAS removing minerals

NEW! $1800.00 Buy Now

We have many other Polyfluoroalkyl and Perfluoroalkyl (PFAS) removal filters available.

QUESTIONS?

CALL TOLL FREE: 800-684-0979